DashCar for the Impala SS
Click on image below for larger view (320 x 240)
The 1st image shows the car sitting on the dash, it's securely attached to the Dashhugger® and isn't going anywhere!
The 2nd image shows the headlights, I opted to install 4 headlights but will probably change to 2 headlights and 2 front signals on the next one.
The 3rd image shows the headlights at night.
The 4th shows the brake lights and third brake light.
The 5th image shows the parking lights.
And the 6th image shows the back-up lights w/ brakes applied.
The car has all parking lights, factory look brake lights w/ third brake light, 4 headlights, front and rear turn signals, back-up lights, alarm indicator on its dash and they all operate when your full size version Impala SS lights operate. The car is attached to a piece of polycarbonate formed to fit into the defrost vent on the top of the dash, this is to provide additional support for the car during hard acceleration. Three screws pass up thru the polycarbonate, the Dashhugger®, 3 small spacers and attach to the bottom of the car using 3 pre-existing holes. The wires for the car pass thru the front air dam, through the dash cover and down into the defrost vent, you can see the wiring in the 2nd image. The car can be easily removed (for that auto-cross event) with the dash cover and 1 small connector. There's a lot of work that goes into one of these and if you want one the price is $400 and I'm afraid you'll have to provide the car (they're getting hard to find) and own a dashcover.
Any Questions? - Jerry