Impala SS Main

Impala SS

Home - Back to Features - FAQs - Installation Instructions - Troubleshooting

For the '94-'96 Impala SS and '91-'96 Caprice!
Priced at only - $159.00! + $12.00 shipping.

What's included in the kit:

Click on photos to enlarge to 320 x 240

Control module
Signal module
2 - signal connectors
Tail light harness
2 - lamp sockets
2 - test/trailer plugs - now included in all kits sold after 10-01-03.
Wire nuts, crimp connectors, tie wraps, tubing
Users Manual in PDF format - before 7/01/03.
Users Manual Rev 3 in PDF format - for units sold after 7/01/03 or with upgrade.
Users Manual Rev 5 in PDF format - for units sold after 6/20/04 or with upgrade.

Note: The new Impala versions will no longer have the turn signal reminder noise.

Download the videos, the top 3 videos demostrate the special show-off / hazards mode. The front signal video shows the 3 selectable front patterns, the first pattern is stock, second is double rate and the third is double flash, the speed setting was not changed during the video, the hazard mode is shown, but the patterns are the same for the turn signals. The speed video demostrates the adjustment range of the speed control from slowest to fastest. The duration video demostrates the adjustment range of the duration control from barely on to barely off, understand the speed and duration are generally mixed to produce various effects. The signal video shows 6 different turn signal settings. The rotating video shows the new rotating pattern adjustment range, the speed is constant and the duration is being slowly adjusted to help give you an idea on what's happening. The brakes/hazards video demostrates turn signals with brakes applied, 2 and 3 light brakes and stock hazards.

Special show-off / hazards videos: Dual Chaser 610K , Wig-Wag 651K , Ping Pong 637K

Front Signal Video 1.1M

Speed Video 2.6M

Duration Video 797K

Signal Video 1.7M , Rotating Video 2.9M , Brakes/Stock Hazards Video 3.1M

Customer Ride - Thumps Video 3.8M

One point about the installation - yes it's harder to install this system than the other guys, it controls both front, both dash and both rear turnsignals (12 bulbs total) but I believe the results are worth it and I think you'll agree. I designed it to be easy as possible to install and convert back to normal. The complete instructions are on-line so you can determine if this system is right for you. Once you purchase a system you will recieve full support in case you have any problems with the install or operation.

How to Make a Test Plug
Note: Test plug shown is older rubber style and is no longer used as of 10/01/03, and all kits sold after that date have the test plugs included - free of charge.

Mail in Order Form

Questions? or Comments ask - jerry@jerryselectronics.com