KED00201 Electronic Rolling Dice Kit



Easy to assemble kit using through-hole components
Small 3.14" x 2" PCB footprint
box measures 3.346" x 2.205" x 1.535" tall
Operates on 3 AA batteries
2 dice display
LED's available in several colors
Comes with box enclosure
CNC machined cover plate

ROHS KED00201 Parts KED00201 Electronic Dice Electronic Dice PCB
Click to enlarge

My easiest to assemble kit and the most fun to use. When you shake it - it begins rolling the numbers and keeps rolling until you stop, then it gradually slows till it stops and flashes on your number. Use it for playing your favorite board games. Completely portable and when used with the cover plate very durable, carry it with you wherever you go.

What’s Included in the kit:

  • 1 - High Quality PC Board
  • 1 - Atmel Micro-Controller IC
  • 1 - 20 Pin IC Socket
  • 1 - Roller Ball Switch
  • 1 - Reset Switch
  • 14 - 5mm LED's
  • 6 - 1k ¼ Watt Resistors
  • 2 - 1m ¼ Watt Resistors
  • 1 - Battery Holder
  • 1 - Project Box

*** Assembly manual is not shipped with kits - you must use the on-line manual ***

What you will need:

  • 3 "AA" batteries
  • Good quality soldering iron 25 – 40 watt
  • Solder tip cleaning sponge
  • Rosin core or no clean solder
  • #1 Phillips screwdriver
  • Diagonal wire cutter
  • Doubled sided tape or glue

PayPal mark
LED colors
KED00201 Electronic Rolling Dice Kit Electronic Rolling Dice Kit

KED00201 Manual PDF format.
$25.95 each